Super-Elmar-S 24 f/3.5 ASPH.

The ultra wide-angle lens

 Expand your horizons

The Leica Super-Elmar-S 24 f/3.5 ASPH. (19 mm in 35 mm format) opens up an enormous range of creative opportunities in image composition – particularly in interior, architectural, and landscape photography.

At the same time, the lens is optimized for maximum contrast rendition and resolution from its widest aperture and guarantees a constantly high level of quality from its closest focusing distance to infinity.

The extraordinary degree of correction of this optical design is reflected, for example, in its almost complete freedom from distortion.

 The highlights

 Ideal for indoor, architecture and landscape photography
  • Nearly no distortion
  • Ideally suited for interior, architectural and landscape photography
  • Excellent imaging performance over the entire range and at all aperture settings
  • Extremely fast
  • Creative use of sharpness and blurring for the plastic extraction of motif details
  • Best image quality up to the edges due to aspherical optics
  • Weather- and dust-sealed lens

 Proofs of performance

 Super-Elmar-S 24 f/3.5 ASPH. in Action

Technical Details

Of its twelve elements in ten groups, five are made of glasses with anomalous partial dispersion. Three of these are fluoride lens elements with particularly low dispersion for the correction of chromatic aberrations. Two aspherical surfaces located behind the iris and the aspherical surface of the front lens minimize monochromatic aberrations.

During focusing, only the middle group of three elements is moved. A floating element is moved independently and ensures that outstanding imaging performance is maintained at its closest focusing range.

Modulation Transfer Function

The MTF is indicated both at full aperture and at f/5.6 and f/8 at long taking distances (infinity).

Shown is the contrast in percentage for 5, 10, 20 and 40 lp/mm across the height of the 35mm film format, for tangential (dotted line) and sagittal (solid line) structures, in white light. The 5 and 10 lp/mm will give an indication regarding the contrast ratio for large object structures. The 20 and 40 lp/mm records the resolution of finer and finest object structures.

Distortion & vignetting

Distortion is the deviation of the real image height (in the picture) from the ideal image height. The relative distortion is the percentage deviation. The ideal image height results from the object height and the magnification. The image height of 27.04mm is the radial distance between the edge and the middle of the image field for the format 30mm×45mm.

The graph of the effective distortion illustrates the appearance of straight horizontal and vertical lines in the picture.

Vignetting is a continous decrease of the illumination to the edges of the image field. The graph shows the percentage loss of illumination over the image height. 100% means no vignetting.

Technical Data

 Super-Elmar-S 24 f/3.5 ASPH. in Action
Order no.11054
Image angle (diagonal, horizontal, vertical)96.6° / 86.5° / 63.9°, corresponds to approx. 19 mm focal length in 35 mm format
Optical design
Number of lenses / groupsDecember 10, 2019
Entrance pupilinfinity: 83.38 mm (in front of bayonet in incident light direction)
close focus limit: 83.79 mm (in front of bayonet in incident light direction)
Focusing range0.4 m to ∞
Distance setting
ScalesCombined meter/feet graduation
Smallest object field349 mm × 533 mm
Largest reproduction ratioJanuary 1, 1970
Aperture
Setting/FunctionElectronically controlled diaphragm, set using setting / selection dial on camera, including half values
Lowest value22
BayonetLeica S bayonet
Filter mount/Lens hoodExternal bayonet for lens hood (included), internal thread for E95 filter, filter mount does not rotate
Dimensions and weight
Length to bayonet mountapprox. 112 / 138 mm (without / with lens hood)
Largest diameterapprox. 101 / 150 mm (without / with lens hood)
Weightapprox. 1260 g

You Can check Super-Elmar-S 24 f/3.5 ASPH on our online store